Color: | |
---|---|
Availability: | |
Quantity: | |
YSC1001
yushengchang
Product Instructions
Please read this Product Instructions in depth before using the product.
1. AC 220V power supply with good grounding shall be guaranteed for the product.
2. Dies may fall down or shift during transport. Please check whether all parts have been installed well before starting the machine. Otherwise, dies and blades may be damaged.
3. To install or tear down tool carriage, you must cut off power supply in advance to prevent injury.
4. To clear the rice at bottom, raise die to certain height and press pause button in advance. If the die is raised to the top, it will return to original position automatically.
5. This product can be only used for cutting soft sushi and sushi rolls wrapped by dry seaweed sheets. If sushi or sushi rolls wrapped by dry seaweed sheets contain hard or tough content, do not use this product to cut them. Otherwise, irreversible damage may be caused to blade, die or the whole machine.
6. Stop the machine and cut off power supply immediately in case of emergency. Otherwise, injury or damage of machine may be caused.
7. The machine can reset automatically. After taking out sushi, the die will return to the original position automatically. If you don't need the function, you can put a non-transparent object to shield emitter or receiver of inductor. Please keep the inductor clean in use.
8. Please be cautious for the sharp blade. Keep cutting edge downward on tool carriage or when it is being cleaned. The non-stick blade with coating can be only cleaned or wiped by soft cloth. Do not use hard object to rub the blade. Otherwise, the coating may fall off. If the cutting edge becomes dull, you can use fine grinding tool to grind the cutting edge. The grinding may degrade non-stick performance of blade. Please keep the blade clean when it is not used. The non-stick coating influences sharpness of blade. If the blade cannot well cut, you can grind the cutting edge slightly to remove the coating on cutting edge (only need to grind a thickness of hair). In most cases, the blade with coating can cut sushi well. This operation is only for your reference.
9. The machine uses rubber belt elevator. Avoid grease and do not use sharp object to clean it.
10. Often inspect whether blades are loose. Blades shall not be too loose. Otherwise, blades may shift and collide with dies. Blades shall not be too tight. Otherwise, the blades may be broken. Inspect degree of tightness from the back of blade before use and take the degree of tightness as reference for later adjustment.
Usage:
Put sushi in die accurately; then both hands press the start buttons on the left and right at the same time. Sushi can be cut during rise. After taking out sushi, the die will return automatically and wait for the next sushi.
The machine can be only used to cut sushi rolls of which diameter is shorter than 60mm. 400~600 rolls can be cut every hour. 2~4 small rolls can be cut at the same time. More than 1200 rolls can be cut every hour.
Usage:
Put sushi in die accurately; then both hands press the start buttons on the left and right at the same time. Sushi can be cut during rise. After taking out sushi, the die will return automatically and wait for the next sushi.
The machine can be only used to cut sushi rolls of which diameter is shorter than 60mm. 400~600 rolls can be cut every hour. 2~4 small rolls can be cut at the same time. More than 1200 rolls can be cut every hour.
The procedures of installation and maintenance:
The buckle on back of die aligns with lifting board. Press it downward well in place.
Inspect straightness and alignment here
Hold both sides of the tool carriage and insert it to groove upward
FAQ
1.How can i get the price? We usually quote within 24 hours after we get your inquiry(Except weekend and holidays). If you are very urgent to get the price, please email us or contact us in other ways so that we can offer you a quote.
2. Can I buy samples placing orders? Yes.Please feel free to contact us.
3.What is your lead time? It depends on the order quantity and the season you place the order. Usually we can ship within 7-15 days for small quantity,and about 30 days for large quantity.
4.How do you make our business long-term and good relationship? (1)We keep good quality and competitive price to ensure our customers benefit ; (2)We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Product Instructions
Please read this Product Instructions in depth before using the product.
1. AC 220V power supply with good grounding shall be guaranteed for the product.
2. Dies may fall down or shift during transport. Please check whether all parts have been installed well before starting the machine. Otherwise, dies and blades may be damaged.
3. To install or tear down tool carriage, you must cut off power supply in advance to prevent injury.
4. To clear the rice at bottom, raise die to certain height and press pause button in advance. If the die is raised to the top, it will return to original position automatically.
5. This product can be only used for cutting soft sushi and sushi rolls wrapped by dry seaweed sheets. If sushi or sushi rolls wrapped by dry seaweed sheets contain hard or tough content, do not use this product to cut them. Otherwise, irreversible damage may be caused to blade, die or the whole machine.
6. Stop the machine and cut off power supply immediately in case of emergency. Otherwise, injury or damage of machine may be caused.
7. The machine can reset automatically. After taking out sushi, the die will return to the original position automatically. If you don't need the function, you can put a non-transparent object to shield emitter or receiver of inductor. Please keep the inductor clean in use.
8. Please be cautious for the sharp blade. Keep cutting edge downward on tool carriage or when it is being cleaned. The non-stick blade with coating can be only cleaned or wiped by soft cloth. Do not use hard object to rub the blade. Otherwise, the coating may fall off. If the cutting edge becomes dull, you can use fine grinding tool to grind the cutting edge. The grinding may degrade non-stick performance of blade. Please keep the blade clean when it is not used. The non-stick coating influences sharpness of blade. If the blade cannot well cut, you can grind the cutting edge slightly to remove the coating on cutting edge (only need to grind a thickness of hair). In most cases, the blade with coating can cut sushi well. This operation is only for your reference.
9. The machine uses rubber belt elevator. Avoid grease and do not use sharp object to clean it.
10. Often inspect whether blades are loose. Blades shall not be too loose. Otherwise, blades may shift and collide with dies. Blades shall not be too tight. Otherwise, the blades may be broken. Inspect degree of tightness from the back of blade before use and take the degree of tightness as reference for later adjustment.
Usage:
Put sushi in die accurately; then both hands press the start buttons on the left and right at the same time. Sushi can be cut during rise. After taking out sushi, the die will return automatically and wait for the next sushi.
The machine can be only used to cut sushi rolls of which diameter is shorter than 60mm. 400~600 rolls can be cut every hour. 2~4 small rolls can be cut at the same time. More than 1200 rolls can be cut every hour.
Usage:
Put sushi in die accurately; then both hands press the start buttons on the left and right at the same time. Sushi can be cut during rise. After taking out sushi, the die will return automatically and wait for the next sushi.
The machine can be only used to cut sushi rolls of which diameter is shorter than 60mm. 400~600 rolls can be cut every hour. 2~4 small rolls can be cut at the same time. More than 1200 rolls can be cut every hour.
The procedures of installation and maintenance:
The buckle on back of die aligns with lifting board. Press it downward well in place.
Inspect straightness and alignment here
Hold both sides of the tool carriage and insert it to groove upward
FAQ
1.How can i get the price? We usually quote within 24 hours after we get your inquiry(Except weekend and holidays). If you are very urgent to get the price, please email us or contact us in other ways so that we can offer you a quote.
2. Can I buy samples placing orders? Yes.Please feel free to contact us.
3.What is your lead time? It depends on the order quantity and the season you place the order. Usually we can ship within 7-15 days for small quantity,and about 30 days for large quantity.
4.How do you make our business long-term and good relationship? (1)We keep good quality and competitive price to ensure our customers benefit ; (2)We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.